YOUNGS MODULUS OF METAL ROD BY INTERFERENCE METHOD APPARATUS

/in /by

TECHNICAL DESCRIPTION :
The experimental rod carries two metal plates at different points. These metal plates support a glass plate & a lens. One is on the top of the other adjusted by three springs & screws. Complete with microscope tube but without weights.
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.3 m(W) X 0.5m ( H )
Weight :Approx. 5 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 37-YOUNGS MODULUS OF METAL ROD BY AN INTEREFRENCE METHOD

MAXWELL VIBRATION NEEDLE APPARATUS

/in /by

TECHNICAL DESCRIPTION : For experiment on rigidity. Two solid & two hollow cylinders each 10 cm long accurately fitting the bore of hollow brass tube 40 cm long are provided. The tube is also fitted with wire, chuck & mirror, graduated scales & verniers on sliding weights complete with ceiling attachment without stand. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.5m ( H ) Weight :Approx. 5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 38-MAXWELL VIBRATION NEEDLE

TORSION APPARATUS VERTICAL TYPE

/in /by

TECHNICAL DESCRIPTION :
A steel frame mounted on heavy cast base with leveling screw. Upper end of the rod under test is held in centering chuck & the lower end is clamped into the axis of a torsion drum which can be rotated by putting load in the scale pan passing over two friction less pulleys. Freely sliding three circular scales graduated in single degrees can be clamped at any position. Three pointers for clamping to the test rod are provided. Complete with two test rods, strings & two scale pans
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.3 m(W) X 0.7m ( H )
Weight :Approx. 7 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 39-TORSION APPARATUS VERTICAL TYPE

SECOND LAW OF MOTION APPARATUS

/in /by

TECHNICAL DESCRIPTION :
Two balls are released simultaneously from a platform being projected horizontally by a spring gun the other being allow to fall freely.
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.3 m(W) X 0.3m ( H )
Weight :Approx. 2 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 40-SECOND LAW OF MOTION APPARATUS

COMPOUND PENDULUM APPARATUS

/in /by

TECHNICAL DESCRIPTION :
Consisting of steel bar 100 cm long bored at equal intervals, with two removable knife edges and wall bracket.
DIMENSIONS AND WEIGHT :
Size :0.15 m.(L)x 0.15 m(W) X 1.0m ( H )
Weight :Approx. 2 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 41-COMPOUND PENDULUM APPARATUS

MOMENT OF INERTIA OF FLYWHEEL

/in /by

TECHNICAL DESCRIPTION : Comprising of carefully machined & balanced cast iron wheel & the steel spindle is supported on ball bearing in a strong iron bracket. A pointer is fixed to one of the bracket. Diametric hole is drilled in the shaft to take a pin & cord. The base is provided with holes so that the apparatus can be fixed to walls. Compete with cord & hooks. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.3 m ( H ) Weight :Approx. 3 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 42-MOMENT OF INERTIA OF FLYWHEEL

CENTRIFUGAL FORCE APPARATUS

/in /by

TECHNICAL DESCRIPTION : In this design two masses moving on ball bearing are carefully pre-portioned so that equilibrium can obtained at moderated speed. Complete with revolution counter, specially made spring dynamometer and with hand rotating device. . DIMENSIONS AND WEIGHT: Size :0.5 m.(L)x 0.5 m(W) X 0.5 m ( H ) Weight :Approx. 5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 43-CENTRIFUGAL FORCE APPARATUS

UNIVERSAL FORCE TABLE

/in /by

TECHNICAL DESCRIPTION : It consists of cast aluminum plate of 400 mm dia. graduated in 360 degrees. The table is fitted on a case iron stable base with leveling screws to make the table in leveled position. It is possible to fix the table in any desired position. Supplied will six set of brass nickeled slotted weight each set containing nine weights and one hanger of 50 grams. And is complete with six sliding clamping pulleys to fix up the same. . DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.5 m(W) X 0.5 m ( H ) Weight :Approx. 4 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 44-UNIVERSAL FORCE TABLE

PARALLELOGRAM OF FORCES APPARATUS

/in /by

TECHNICAL DESCRIPTION :
It consists of a wooden board of about 60 x 50 cm. size. With wall brackets, two frictionless clamp pulleys, and three set of slotted weights of iron, nickelled each set containing four iron nickelled weights and one hanger of 50 gms.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5 m ( H )
Weight :Approx. 4 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 45-PARALLELOGRAM OF FORCES APPARATUS

PULLEY DEMONSTRATION SET

/in /by

TECHNICAL DESCRIPTION : Almost every kind of pulley experiment can be demonstrated with the help of this equipment. It is very much interesting and of educational value to students, comprising of wooden polished base of about 100 x 20 cm size with two metal supports and a horizontal bar having eight adjustable collars with hooks from which pulleys can be suspended. The following accessories are provided with the unit. DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx. 4 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 46-PULLEY DEMONSTRATION SET