SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Reciprocating Air Compressor.
2. To study & determine Isothermal Work, Isentropic Work, Actual Work Volumetric Efficiency, Isothermal Efficiency,
Isentropic Efficiency & Free Air Delivery at different delivery pressure.
3. To Plot Volumetric Efficiency/Isothermal Efficiency
Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.

TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an
orifice at one end & other end connected to cylinder. The orifice pressure
tapping is connected to one limb of U -Tube manometer on panel.
Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2
) & ( T3 ) records temperature of air in receiver.
Energy meter is used to record the power input to motor & in turn the work
required for compression. The control panel houses starter for motor, main
switch, Temperature Indicator .
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0 m ( H )
Weight :Approx. 120 Kg
SERVICE REQUIRED :
Power Supply : 440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 1-SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

COMPUTERISED SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Reciprocating Air Compressor.
2. To study & determine Isothermal Work, Isentropic Work, Actual Work Volumetric Efficiency, Isothermal Efficiency,
Isentropic Efficiency & Free Air Delivery at different delivery pressure on computer
3. To Plot Volumetric Efficiency/Isothermal Efficiency
Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot on computer

TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to differential pressure transmitter on panel. Temperature transmitter T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2 ) & ( T3 ) records temperature of air in receiver.
Energy Transmitter is used to record the power input to motor & in turn the work required for compression. The control panel houses starter for motor, main switch, Temperature Indicator . A pressure and angle sensor provided for plotting PV Plot on computer.A suitable scada software provided for analysis.
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0 m ( H )
Weight :Approx. 130 Kg
SERVICE REQUIRED :
Power Supply : 440v, AC ,Three Phase , 50HZ
Computer with suitable version
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 2-COMPUTERIDSED SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

TWO STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Reciprocating Air Compressor.
2. To study & determine Isothermal Work, Isentropic Work, Actual Work Volumetric Efficiency, Isothermal Efficiency,
Isentropic Efficiency & Free Air Delivery at different delivery pressure.
3. To Plot Volumetric Efficiency/Isothermal Efficiency
Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to one limb of U -Tube manometer on panel. Thermocouple T1, T2, T3,T4 , T5reads temperature at inlet ( T1 ) outlet Temperature from 1st cylinder ( T2 ) &after intercooler temperature ( T3 ) , after 2nd cylinder ( T4 ) and Tank Temperature ( T5 ) records temperature of air.

Energy meter is used to record the power input to motor & in turn the work
required for compression. The control panel houses starter for motor, main
switch, Temperature Indicator .
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0 m ( H )
Weight :Approx. 250 Kg
SERVICE REQUIRED :
Power Supply : 440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 3-TWO STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

COMPUTERISED SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Reciprocating Air Compressor.
2. To study & determine Isothermal Work, Isentropic Work, Actual Work Volumetric Efficiency, Isothermal Efficiency,
Isentropic Efficiency & Free Air Delivery at different delivery pressure on computer
3. To Plot Volumetric Efficiency/Isothermal Efficiency
Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot on computer
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to differential pressure transmitter on panel. Temperature transmitter T1, T2, T3 ,T4 , T5reads temperature at inlet ( T1 ) outlet Temperaturefrom 1st cylinder ( T2 ) & after intercooler temperature ( T3 ) , after 2nd cylinder (
T4 ) and Tank Temperature ( T5 ) records temperature of air.
Energy Transmitter is used to record the power input to motor & in turn the work
required for compression. The control panel houses starter for motor, main
switch, Temperature Indicator . A pressure and angle sensor provided for plotting
PV Plot on computer.A suitable scada software provided for analysis.
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 1.7m ( H )
Weight :Approx. 120 Kg
SERVICE REQUIRED :
Power Supply :440v, AC ,Three Phase , 50HZ
Computer with suitable version
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 4-COMPUTERIDSED TWO STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

VARIABLE SPEED SINGLE STAGE RECIPROCATING AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Reciprocating Air Compressor.
2. To study & determine Isothermal Work, Isentropic Work, Actual Work Volumetric Efficiency, Isothermal Efficiency,
Isentropic Efficiency & Free Air Delivery at different delivery pressure.
3. To Plot Volumetric Efficiency/Isothermal Efficiency
Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.
4. The experiments can be conducted at various speed & calculation can be made accordingly.

TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an
orifice at one end & other end connected to cylinder. The orifice pressure
tapping is connected to one limb of U -Tube manometer on panel.
Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2
) & ( T3 ) records temperature of air in receiver.
Energy meter is used to record the power input to motor & in turn the work
required for compression. The control panel houses starter for motor, main
switch, Temperature Indicator .. Speed of compressor is varied by using
reduction pulley.
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0 m ( H )
Weight :Approx. 120 Kg
SERVICE REQUIRED :
Power Supply :440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 5-VARIABLE SPEED RECIPROCATING AIR COMPRESSOR TEST RIG

CENTRIFUGAL AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Centrifugal Air Compressor.
2. To study & determine, Actual Work, Volumetric Efficiency.
at different delivery pressure.
3. Observations can be taken by air compressed in storage & free condition.
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to one limb of U -Tube manometer on panel. Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2 ) & ( T3 ) records temperature of air in receiver.
Energy meter is used to record the power input to motor & in turn the work required for compression. The control panel houses starter for motor, main switch, Temperature Indicator .

DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0m ( H )
Weight :Approx. 250 Kg
SERVICE REQUIRED :
Power Supply : 440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 6-CENTRIFUGAL AIR COMPRESSOR TEST RIG

ROTARY AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories usedin Rotary Air Compressor.
2. To study & determine Actual Work,Pressure After Internal Compression,Volume After Internal Compression, WorkRequired to Internal Compression, WorkRequired to Increase the Pressure, TotalWork Required, Isentropic Work, ActualWork, Vane Efficiency, IsentropicEfficiency & Free Air Delivery at differentdelivery pressure.
3. To Plot Vane Efficiency/IsentropicEfficiency against Delivery Pressure &comment on the nature of the plot.
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to one limb of U -Tube manometer on panel. Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2 ) & ( T3 ) records temperature of air in receiver.Energy meter is used to record the power input to motor & in turn the work
required for compression. The control panel houses starter for motor, main
switch, Temperature Indicator .
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0m ( H )
Weight :Approx. 200 Kg
SERVICE REQUIRED :
Power Supply : 440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 7-ROTARY AIR COMPRESSOR TEST RIG

 

AXIAL FLOW AIR COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Axial Flow Air Compressor.
2. To study & determine Isentropic Work, Actual Work, Volumetric Efficiency, Isentropic Efficiency & Free Air
Delivery at different delivery pressure.
3. To Plot Volumetric Efficiency/Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to one limb of U -Tube manometer on panel. Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2 ) & ( T3 ) records temperature of air in receiver.
Energy meter is used to record the power input to motor & in turn the work required for compression. The control panel houses starter for motor, main switch, Temperature Indicator .

DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0m ( H )
Weight :Approx. 200 Kg
SERVICE REQUIRED :
Power Supply :440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 8-AXIAL FLOW AIR COMPRESSOR TEST RIG

SCREW COMPRESSOR TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Screw Air Compressor.
2. To study & determine Isentropic Work, Actual Work, Volumetric Efficiency, Isentropic Efficiency & Free Air
Delivery at different delivery pressure.
3. To Plot Volumetric Efficiency/Isentropic Efficiency against Delivery Pressure & comment on the nature of the plot.
TECHNICAL DESCRIPTION :
The test rig consists of Air Compressor with an air suction tank, is fitted with an orifice at one end & other end connected to cylinder. The orifice pressure tapping is connected to one limb of U -Tube manometer on panel. Thermocouple T1, T2, T3 reads temperature at inlet ( T1 ) outlet Temperature ( T2 ) & ( T3 ) records temperature of air in receiver.
Energy meter is used to record the power input to motor & in turn the work required for compression. The control panel houses starter for motor, main switch, Temperature Indicator

DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.0 m(W) X 2.0m ( H )
Weight :Approx. 200 Kg
SERVICE REQUIRED :
Power Supply :440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 9-SCREW COMPRESSOR TEST RIG

CENTRIFUGAL BLOWER( BACKWARD CURVES )TEST RIG

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study all components/Accessories used in Centrifugal Blower.
2. To study & determine Blower Capacity, Output Work, Input Work, FanEfficiency at different delivery pressure.
3. To Plot Fan Efficiency, Blower Total Pressure, Input Power against BlowerCapacity at Delivery Pressure & comment on the nature of the plot.
TECHNICAL DESCRIPTION :
The test rig consists of two pitot tubes provided with two differential manometerto measure pressure of air at the inlet & outlet side of the blower. Energy meter is used to record the power input of motor. Speed of the blower is varied by using reduction pulley or auto transformer.
DIMENSIONS AND WEIGHT :
Size :2.0 m.(L)x 1.5 m(W) X 1.0m ( H )
Weight :Approx. 150 Kg
SERVICE REQUIRED :
Power Supply :440v, AC ,Three Phase , 50HZ
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
OPTIONAL FACILITY: Data logging Facility

Get More Details:- 10-CENTRIFUGAL BLOWER (BACKWARD CURVES) TEST RIG