BATCH REACTOR

DESCRIPTION : Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.
RANGE OF EXPERIMENTS :
1. Study of Batch Reactor
2. To calculate the reaction rate constant k for given reaction in batch reactor
EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Stirrer : 1 No.SS impeller and shaft coupled to
FHP Motor
Piping : SS, PVC
Setup Mounting : On sturdy MS stand with powder coated
SERVICE REQUIRED: Water Supply : @ 2 lpm
Power Supply: 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1 m. ( L) x 1.0 m (W) X 1 m (H).
WEIGHT : @ 40 Kg

Get More Details:- 01-BATCH RACTOR

ISO THERMAL BATCH REACTOR

DESCRIPTION : Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.
RANGE OF EXPERIMENTS
1. Study of Isothermal Batch Reactor.
2. To calculate the reaction rate constant k for given
reaction in isothermal batch reactor
EXPERIMENTAL SETUP:
Reactor : Material Stainless steel (SS) ,
Water Bath : Material SS, Double Wall, Insulated with
glass Wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to
Digital Temp Indicator: 0F H–P 2 0M0o 0t oCr, Indicator cum Controller
Temp Sensor : CR /AL Type
Piping : SS, PVC
Setup Mounting: On sturdy MS stand with powder coated
CHEMICALS REQUIRED: NaOH, Ethyl Acetate, HCL,
Phenolphthalein indicator, Distilled water
SERVICE REQUIRED: Water Supply: @ 2 lpm
Power Supply: 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1 m. ( L) x 1.0 m (W) X 1 m (H).
WEIGHT : @ 45 Kg

Get More Details:- 02-ISOTHERMAL BATCH REACTOR

ADIABATIC BATCH REACTOR

DESCRIPTION : Adiabatic batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated. RANGE OF EXPERIMENTS 1. Study of Adiabatic Batch Reactor. 2. To calculate the reaction rate constant k for given reaction in Adiabatic batch reactor EXPERIMENTAL SETUP : Reactor : Material Stainless steel (SS) , Water Bath : Material SS , Double Wall , Insulated with glass wool Heater : Nichrome wire heater Stirrer : 1 No.SS impeller and shaft coupled to Digital Temp Indicator : 0F H–P 2 0M0o 0t oCr, Indicator cum Controller. Temp Sensor : CR /AL Type. Stop watch : Electronic Piping : SS , PVC Setup Mounting : On sturdy MS stand with powder coated CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator , Distilled water SERVICE REQUIRED : Water Supply : @ 2 lpm Power Supply : 230 V, 50 Hz, A.C. SPACE REQUIRED : 1 m. ( L) x 1.0 m (W) X 1 m (H). WEIGHT : @ 45 Kg

Get More Details:- 03-ADIABATIC BATCH REACTOR

SEMI BATCH REACTOR

DESCRIPTION : Semi Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated. RANGE OF EXPERIMENTS 1. Study of Semi Batch Reactor. 2. To calculate the reaction rate constant k for given reaction in Semi batch reactor EXPERIMENTAL SETUP : Reactor : Material Stainless steel (SS) , Feed Circulation : By Compressed Air Pressure Regulator : 0-2 kgf / cm2 Pressure Gauge : Bourdon type 0 – 2 kgf / cm2 Feed Tank : 1 No. of stainless steel feed tank Flow Measurement : 1 No. Pre calibrated Rota meter Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor Piping : SS , PVC Setup Mounting : On sturdy MS stand with Powder coated CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator , Distilled water SERVICE REQUIRED : Air Supply : @ 4 Kg /cm2 Water Supply : @ 2 lpm Power Supply : 230 V, 50 Hz, A.C. SPACE REQUIRED : 1 m. ( L) x 1.0 m (W) X 1 m (H). WEIGHT : @ 50 Kg

Get More Details:- 04-SEMI BATCH REACTOR

ISOTHERAML SEMI BATCH REACTOR

DESCRIPTION : Semi Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.
RANGE OF EXPERIMENTS
1. Study of Isothermal Semi Batch Reactor.
2. To calculate the reaction rate constant k for given reaction in Isothermal Semi batch reactor
EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Feed Tank : 1 No. of stainless steel feed tank
Flow Measurement : 1 No. Pre calibrated Rota meter
Stirrer : 1 No.SS impeller and shaft coupled to
FHP Motor
Digital Temp Indicator : 0F H–P 2 0M0o 0t oCr, Indicator cum Controller.
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with
Powder coated

CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL ,
Phenolphthalein indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1 m. ( L) x 1.0 m (W) X 1 m (H).
WEIGHT : @ 50 Kg

Get More Details:- 05-ISOTHERMAL SEMI BATCH REACTOR

PLUG FLOW REACTOR

DESCRIPTION : Plug flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind . Actually there may be lateral mixing of fluid in plug flow reactor . However , there must be no mixing or diffusion along the flow path. In a plug flow reactor composition of fluid varies from point to point along the flow path. RANGE OF EXPERIMENTS 1. To study of Plug flow reactor. 2. To calculate the reaction rate constant k for given reaction in Plug flow reactor EXPERIMENTAL SETUP : Reactor : Material Stainless steel (SS) , Flow Measurement : 2 No. Pre calibrated Rota meter Feed Tank : 2 No. of stainless steel feed tank Feed Circulation : By Compressed Air Pressure Regulator : 0-2 kgf / cm2 Pressure Gauge : Bourdon type0 – 2 kgf / cm2 Piping : SS , PVC Product receiver : 1 No. SS tank Setup Mounting : On sturdy MS stand with powder coated SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2 Power Supply : 230 V, 50 Hz, A.C. SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.0 m (H). WEIGHT : @ 50 Kg

Get More Details:- 06-PLUG FLOW REACTOR

ISOTHERMAL PLUG FLOW REACTOR

DESCRIPTION : Plug flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind
RANGE OF EXPERIMENTS
1. To study of Isothermal Plug flow reactor.
2. To calculate the reaction rate constant k for
given reaction in Isothermal Plug flow reactor
EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall ,
: Insulated with glass Wool
Heater : Nichrome wire heater
Digital Temp Indicator : 0 – 200 0 C ,Indicator cum Controller
Temp Sensor : CR /AL Type.
Stop watch : Electronic
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder
coated

CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL ,
Phenolphthalein indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

Get More Details:- 07-ISOTHERMAL PLUG FLOW REACTOR

CONTINUOUS STIRRED TANK REACTOR

DESCRIPTION C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor
RANGE OF EXPERIMENTS :
1. Study of Continuous stirred tank reactor.
2. To calculate the reaction rate constant k for given reaction in Continuous stirred tank reactor the sturdy MS stand with powder coated.
EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL ,
Phenolphthalein indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 55 Kg

Get More Details:- 08-CONTINUOUS STIRRED TANK REACTOR

ISOTHERMAL CONTINUOUS STIRRED TANK REACTOR

DESCRIPTION : C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactorThe reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform. RANGE OF EXPERIMENTS : 1. Study of Isothermal Continuous stirred tank reactor. 2. To calculate the reaction rate constant k for given reaction in Isothermal Continuous stirred tank reactor

EXPERIMENTAL SETUP : Reactor : Material Stainless steel (SS) , Flow Measurement : 2 No. Pre calibrated Rota meter Feed Tank : 2 No. of stainless steel feed tank Feed Circulation : By Compressed Air Pressure Regulator : 0-2 kgf / cm2 Pressure Gauge : Bourdon type 0 – 2 kgf / cm2 Water Bath : Material SS , Double Wall , Insulated with glass Wool Heater : Nichrome wire heater Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor Digital Temp Indicator : 0 – 200 0 C , Indicator cum Controller Temp Sensor : CR/AL Type stop watch : Electronic Piping : SS , PVC Setup Mounting : On sturdy MS stand with powder coated. CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator , Distilled water SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2 Water Supply : @ 2 lpm Power Supply : 230 V, 50 Hz, A.C. SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H). WEIGHT : @ 55 Kg

Get More Details:- 09- ISOTHERMAL CONTINUOUS STIRRED TANK REACTOR

THREE CONTINUOUS STIRRED TANK REACTOR IN SERIES

DESCRIPTION : C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactorThe reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.
RANGE OF EXPERIMENTS :
1. Study of Continuous stirred tank reactor in series .
2. To calculate the reaction rate constant k for given reaction in
Continuous stirred tank reactor in series

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) , 3 No.
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS, Double Wall, Insulated
with glass Wool
Heater : Nichrome wire heater
Stirrer : 3 No.SS impeller and shaft
coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C , Indicator cum Controller
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL ,
Phenolphthalein indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 70 Kg

Get More Details:- 10-THREE CSTR IN SERIES