MAXWELL RECIPROCAL THEOREM

TECHNICAL DESCRIPTION : Simple supported best type supported at its end., a wooden beam with steel back plate. Complete with two strups, hooks & two weights DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.4Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 57-MAXWELL RECIPROCAL THEOREM

SHEAR LEGS APPARATUS

TECHNICAL DESCRIPTION : Mounted on sturdy wooden base with provision for changing the width between legs, complete with two tubular compression balances,one tension balance and scale pan.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 58-SHEAR LEGS APPARATUS

STRUCTURAL MECHANICS COMPLETE SET

TECHNICAL DESCRIPTION :
It is very easy to form different trusses with the given material and find out stress in different members. The following fourteen types of models can be easily constructed :
1 Single Cantilever
2 Cantilever with four members
3 Simple Roof Truss
4 Roof Truss with Angled Tie Rods (Roof Truss ‘A’)
5. A Composite frame wirk (Four in one frame)
6 King Post Roof Truss

Get PDF:- 59-STRUCTURAL MECHANICS COMPLETE SET

BASIC ROOF TRUSS APPARATUS

TECHNICAL DESCRIPTION : The apparatus consists of two rafter struts and a restraining tie mounted on a self contained, bench top base Both struts and tie incorporate linear, direct reading spring balances to measure forces Loading at the hinged apex by load hanger The tie length, and hence angle of truss, variable Struts and tie re-adjustable to original lengths DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.3Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 60-BASIC ROOF TRUSS APPARATUS

CENTRE OF GRAVITY APPARATUS

TECHNICAL DESCRIPTION : The apparatus is a bench mounted unit with a free standing backboard with a pin in it from which a selection of flat shapes can be hung. A simple plumb bob is suspended from the same pin.6 shapes provided; a circle, isosceles triangle, trapezium, L, T and semi-circle DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.3Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 61-CENTRE OF GRAVITY APPARATUS

LAW OF CONSERVATION OF MASS

TECHNICAL DESCRIPTION :
The apparatus consists of an attractive and durable curved tracks grooved in the middle on which rolls a steel balls can be clamped on the table. A leveling screw is provided under the base to make the lower end of track horizontal. The rack carries an adjustable automatic release system to permit setting of the ball at exactly the same starting point for multiple runs. An adjustable support attached to the base holds the second ball directly in the path of the first, or displaced from the path to cause the collision to occur at different angles & at different distances from the end of the tracks.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 62-LAW OF CONSERVATION OF MASS

THICKNESS GAUGE

TECHNICAL DESCRIPTION : Used for determining the Flakiness Index of Aggregates. It consists of a frame with a sliding panel. The Panel has slots of Different Standard Lengths and Widths accurately Cut DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.25 m(W) X 0.02m ( H ) Weight :Approx. 1 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 01-THICKNESS GAUGE

LENGTH GAUGE

TECHNICAL DESCRIPTION :
Consists of a hard wood base with vertically mounted metal studs as Specified in the IS 2386 (Part-1) & BS 812
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.1 m(W) X 0.1m ( H )
Weight :Approx. 1 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 02-LENGTH GAUGE

BULK DENSITY APPARATUS

TECHNICAL DESCRIPTION :
It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Capacities available 3 litres, 5 litres, 7 litres, 15 litres & 30 litres. Complete with One Tamping Rod 16mm dia x 600mm long both ends rounded
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:-03-BULK DENSITY APPARATUS

METAL MEASURES

TECHNICAL DESCRIPTION :
Used For The Determination of the Unit Weight of Aggregates . Made from Sheet Iron, Complete with Handle, Capacity 10 litres andCapacity
20 litres
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 04-METAL MEASURES