THICKNESS GAUGE

TECHNICAL DESCRIPTION : Used for determining the Flakiness Index of Aggregates. It consists of a frame with a sliding panel. The Panel has slots of Different Standard Lengths and Widths accurately Cut DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.25 m(W) X 0.02m ( H ) Weight :Approx. 1 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 01-THICKNESS GAUGE

LENGTH GAUGE

TECHNICAL DESCRIPTION :
Consists of a hard wood base with vertically mounted metal studs as Specified in the IS 2386 (Part-1) & BS 812
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.1 m(W) X 0.1m ( H )
Weight :Approx. 1 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 02-LENGTH GAUGE

BULK DENSITY APPARATUS

TECHNICAL DESCRIPTION :
It Determines Bulk Density or unit weight of aggregates. It consists of a Calibrated Cylindrical Measures of sheet iron with handles. Capacities available 3 litres, 5 litres, 7 litres, 15 litres & 30 litres. Complete with One Tamping Rod 16mm dia x 600mm long both ends rounded
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:-03-BULK DENSITY APPARATUS

METAL MEASURES

TECHNICAL DESCRIPTION :
Used For The Determination of the Unit Weight of Aggregates . Made from Sheet Iron, Complete with Handle, Capacity 10 litres andCapacity
20 litres
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 04-METAL MEASURES

DENSITY BASKET

TECHNICAL DESCRIPTION :
Used For Density Tests on Aggregates as per Procedure Laid Down.Made of Brass/GI with Stainless steel Wire Mesh 6.3mm/4.75mm size6.3mm/4.75mm Ruggedly Constructed, Approximately 20cm dia x 20cm high.Complete with Handle
DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.3 m(W) X 0.4m ( H )
Weight :Approx. 2 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 05-DENSITY BASKET

SPECIFIC GRAVITY AND WATER ABSORPTION OF AGGREGATE

TECHNICAL DESCRIPTION :
This Set is used For Specific Gravity And Water Absorption Of Aggregates.
The outfit comprises of
1. Electronic balance, capacity 5 kg. Least Count 0.1gm, provision is made in this balance to suspend density basket under material pan. This balance is mounted on an angle iron frame stand.
2. Density basket.
3. Air tight container to suspend density basket.
4. GI Tray of area not less than 650 cm sq.
5. Absorbent cloths 75cm x 45cm
DIMENSIONS AND WEIGHT :
Size :0.6 m.(L)x 0.6 m(W) X 1.0m ( H ) Weight :Approx. 40 Kg
SERVICE REQUIRED :
Power Supply : 230 v AC , Single Phase 6amps , 50 hz
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 06-SPECIFIC GRAVITY AND WATER ABSORPTION OF AGGREGATE

RIFFLE SAMPLE DIVIDER

TECHNICAL DESCRIPTION : Used for sampling Aggregates, Ores, Refractory. It consists of a sheet metal box mounted on Legs and fitted with a series of chutes of equal width which discharge the material alternatively in Opposite Directions into separate pans. The chutes of the Riffle are steep enough to allow rapid flowing of the Materials. The instrument has 14 Nos. Chutes of 13mm width and is complete with receivers DIMENSIONS AND WEIGHT : Size :0.6 m.(L)x 0.6 m(W) X 1.0m ( H ) Weight :Approx. 20 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 07-RIFFLE SAMPLE DIVIDER

AGGREGATE SAMPLE SPLITTER

TECHNICAL DESCRIPTION : Designed for the reduction of test samples which are too large in volume to be conveniently handled. It handles any material from Sand sizes up to dia. 108 mm. Each Chute bar is 12 mm wide so that openings of 12-24-36-4848-60-72-84-96-108 mm are possible. Complete with two collecting pans. Clam shell hopper: 30 litres capacity. Very sturdily constructed, it is totally Cadmium Plated for rust Protection DIMENSIONS AND WEIGHT: Size: 0.6 m.(L)x 0.6 m(W) X 1.0m ( H ) Weight : Approx. 30 Kg SERVICE REQUIRED: SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 08-AGGREGATE SAMPLE SPLITTER

AGGREGATE CRUSHING VALUE APPARATUS

TECHNICAL DESCRIPTION : For Measuring of Resistance of Aggregate to Crushing. Consists of M.S. Cylindrical Container 150mm +/ 0.5mm dia. x 130mm to 140mm high with base plate 200 to 230mm/sqr x 6mm thick. A plunger of 148mm +/-0.5mm dia. x 100 to 115mm high. Supplied complete with Tamping Rod, 16mm dia. x 600mm long, both end rounded, 1 no. Metal Measure 115+/ 0.5mm dia. x 180 +/- 0.5mm115+/- high. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.2m ( H ) Weight :Approx. 10 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 09-AGGREGATE CRUSHING VALUE APPARATUS

AGGREGATE IMPACT TESTER

TECHNICAL DESCRIPTION :
For Determining The aggregate Impact Value.
The instrument consists of a circular base with Two vertical guides. The Hammer of weight 13.75 +/+/-0.25kg can be raised to fall freely down the vertical guides. The Height of fall can be adjusted through 380 +/ 5mm. The+/- Hammer is provided with a locking arrangement. The hammer falls freely to the base and is removable for employing. Supplied complete with metal measure 75mm dia. x 50mm high (For specimen preparation) and Tamping Rod 230mm long x 10mm diameter.
A Blow Counter to count the number of strokes is fitted on top of the equipment

DIMENSIONS AND WEIGHT :
Size :0.3 m.(L)x 0.3 m(W) X 0.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:-10-AGGREGATE IMPACT TESTER