CRE – 021 RTD IN CSTR

Mixed flow reactor is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor The reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.
EXPERIMENTAL SETUP
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS, Double Wal, Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to `FHP Motor
Digital Temp Indicator : 0 – 200 0 C
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator, Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 020 RTD PLUG FLOW REACTOR

EXPERIMENTAL SETUP :
Reactor :Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 019 RTD BATCH REACTOR

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor
Piping : SS, PVC
Setup Mounting : On sturdy MS stand with powder coated
SERVICE REQUIRED : Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 40 Kg

CRE – 018 RTD IN PACKED BED REACTOR

EXPERIMENTAL SETUP :
Reactor : Material Borosilicate glass,
Packing : Raschig Rings
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator : 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 017 COMBINED FLOW REACTOR

The set up consist of plug flow reactor and stirred tank reactor arranged in series in which the reaction is carried out. The flow rate of reactant is measured by the Rota meter. The temperature is measured by sensor

RANGE OF EXPERIMENTS :

  1. Study of Combined flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Combined flow reactor.

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) , 1No. of CSTR , 1No. PFR
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator : 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping :SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
SPACE REQUIRED :1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply: 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V.
WEIGHT : @ 50 Kg

CRE – 016 ISOTHERMAL PACKED BED REACTOR

When the variation in reaction rate within a reactor is so large , we choose to account for these variations in the method of analysis , then we have packed bed reactor , since rates are concentrations dependant such large variation may be expected to occur when compositions of reactant fluid changes significantly passing through the reactor.

RANGE OF EXPERIMENTS :

  1. Study of Isothermal Packed bed reactor.
  2. To calculate the reaction rate constant k for given reaction in isothermal Packed bed reactor

EXPERIMENTAL SETUP

CRE – 015 PACKED BED REACTOR

When the variation in reaction rate within a reactor is so large , we choose to account for these variations in the method of analysis , then we have packed bed reactor , since rates are concentrations dependant such large variation may be expected to occur when compositions of reactant fluid changes significantly passing through the reactor.

RANGE OF EXPERIMENTS :

  1. Study of Packed bed reactor.
  2. To calculate the reaction rate constant k for given reaction in Packed bed reactor

EXPERIMENTAL SETUP :
Reactor : Material Borosilicate glass,
Packing : Raschig Rings
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator : 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL ,
Phenolphthalein indicator, Distilled
water
SERVICE REQUIRED : Air Supply: @ 6 CFM at 4 Kg /cm2
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 014 ISOTHERMAL TUBULAR FLOW REACTOR (COILED TUBE TYPE)

Tubular flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind . Actually there may be lateral mixing of fluid in plug flow reactor . However , there must be no mixing or diffusion along the flow path. In a plug flow reactor composition of fluid varies from point to point along the flow path.

RANGE OF EXPERIMENTS :

  1. To study of Isothermal Plug flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Isothermal Plug flow reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , \ Insulated with glass Wool
Heater : Nichrome wire heater
Digital Temp Indicator : 0 – 200 0 C ,Indicator cum Controller
Temp Sensor : CR /AL Type.
Stop watch : Electronic
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
SPACE REQUIRED :1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
CHEMICALS REQUIRED :NaOH, Ethyl Acetate , HCL ,
Phenolphthalein indicator, Distilled water
SERVICE REQUIRED : Air Supply: @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
WEIGHT : @ 50 Kg

CRE – 013 TUBULAR FLOW REACTOR (COILED TUBE TYPE)

Tubular flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind . Actually there may be lateral mixing of fluid in plug flow reactor . However , there must be no mixing or diffusion along the flow path. In a plug flow reactor composition of fluid varies from point to point along the flow path.

RANGE OF EXPERIMENTS :

  1. To study of Plug flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Plug flow reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply: @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 012 ISOTHERMAL MIXED FLOW REACTOR

Mixed flow reactor is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor

  1. Study of Isothermal Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Isothermal Continuous stirred tank Reactor

EXPERIMENTAL SETUP :

Reactor :Material Stainless steel (SS) ,
flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 3 No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C, Indicator cum Controller
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg