TECHNICAL DESCRIPTION :
Consisting of a nickelled steel beam one meter long, two knife edge clamps, strip and scale pan.. Binding posts are provided for the purpose.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.4 m ( H )
Weight :Approx. 5 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 51-ELASTICITY OF FLEXURE APPARATUS
TECHNICAL DESCRIPTION : Consists of two low-friction pulleys of 50 mm dia. mounted on a metal rod. Supplied complete with Support rod & base 5” x 8”, Slotted weight one each of 20g, 50g & 3 of 100g, 2 pcs. Mass hanger, 1 bosshead and nylon thread. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.3 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 52-ATWOOD MACHINE
TECHNICAL DESCRIPTION :
All metal capable of being assembled and dismantled easily. A large metal trolley with removable cylindrical weights is fitted with wheels which run with very little friction on a track of two steel rods 150 cm long. The rail rods are held in heavy clamps which are fitted in two vertical rods, mounted on cast iron feet. The steel vibrator is fitted to one of the vertical rods and frictionless pulley to the other. The unit is capable to verify the law under different conditions, Complete with cord scale pan, brush and ink.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 53-FLETCHER TROLLY
TECHNICAL DESCRIPTION :
Consisting of 120 x 1.2 cm brass bar with pointed ends, carrying two sets of adjustable knife edges and two large and small brass weights. Two similar hard wood weights are provided. Complete with cast iron wall bracket.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 54-KATERS REVERSIBLE PENDULUM
TECHNICAL DESCRIPTION :
Horizental bench pattern. The wheel moving on ball bearing is provided with a chuck to hold the rod under test. The other end of the rod is clamed tightly to a bracket. The pointers and scales are graduated in single degree and can be clamped at any position. Complete with ribbon, hook and rods of steel and brass, but without weights.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.7Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 55-TORSION APPARATUS SEARLS TYPE
TECHNICAL DESCRIPTION :
Wire under test is connected to two brass rods 30 cm long at their mid points, complete with three test wires and with end screws. Rods are suspended from hooks fitted on a steel plate.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 56-MODULUS OF RIGIDITY OF WIRE
TECHNICAL DESCRIPTION : Simple supported best type supported at its end., a wooden beam with steel back plate. Complete with two strups, hooks & two weights DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.4Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 57-MAXWELL RECIPROCAL THEOREM
TECHNICAL DESCRIPTION : Mounted on sturdy wooden base with provision for changing the width between legs, complete with two tubular compression balances,one tension balance and scale pan.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H )
Weight :Approx.4Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 58-SHEAR LEGS APPARATUS
TECHNICAL DESCRIPTION :
It is very easy to form different trusses with the given material and find out stress in different members. The following fourteen types of models can be easily constructed :
1 Single Cantilever
2 Cantilever with four members
3 Simple Roof Truss
4 Roof Truss with Angled Tie Rods (Roof Truss ‘A’)
5. A Composite frame wirk (Four in one frame)
6 King Post Roof Truss
Get PDF:- 59-STRUCTURAL MECHANICS COMPLETE SET
TECHNICAL DESCRIPTION : The apparatus consists of two rafter struts and a restraining tie mounted on a self contained, bench top base Both struts and tie incorporate linear, direct reading spring balances to measure forces Loading at the hinged apex by load hanger The tie length, and hence angle of truss, variable Struts and tie re-adjustable to original lengths DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.3 m(W) X 0.5 m ( H ) Weight :Approx.3Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual
Get PDF:- 60-BASIC ROOF TRUSS APPARATUS
