Archive for month: January, 2018

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To determination the Drop point of Grease
TECHNICAL DESCRIPTION : It consists of dropping point cup made out of heavy quality brass, oil bath which is made borosilicate glass beaker, heater of suitable sized capacity & test tube. Hand stirrer for uniform temperature in bath .Temperature measured by using Thermometer. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.4m ( H ) Weight :Approx. 5 Kg SERVICE REQUIRED : Power Supply : 230v AC Single Phase SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 26-DROP POINT OF GREASE APPARATUS

RANGE OF EXPERIMENTS TO BE CARRIED OUT: To Perform worked penetration” tests on lubricating greases TECHNICAL DESCRIPTION : Hand lever operated grease working machine designed for short duration “worked penetration” tests on lubricating greases. Consists of one steel ASTM grease worker with hand lever mechanism mounted on a sturdy steel base. Spring loaded tightening clamps hold grease worker securely on base, and steel pins in hand lever upright support facilitate disassembly of grease worker. DIMENSIONS AND WEIGHT : Size :0.2 m.(L)x 0.2 m(W) X 0.3m ( H ) Weight :Approx. 3 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 28-GREASE WORKER

TECHNICAL DESCRIPTION :
Hot Air Oven Electrically Operated and Thermostatically Controlled, Stainless Steel internal chamber and External Body made of Mild Steel Sheet (Powder Coated Paint) or Stainless Steel Sheet with glasswool insulation between the chambers. Temperature Thermostatically controlled by hydraulic thermostat from ambient to 250°C. Air ventilators are also provided on the sides of the unit. Internal chamber is provided with ribs for adjusting the shelves according to requirements. The On/Off Rocker Switch with Indicator and Thermostat Indicator is fitted on the display panel.
DIMENSIONS AND WEIGHT :
Size :0.7 m.(L)x 0.7 m(W) X 0.7m ( H )
Weight :Approx. 20Kg
SERVICE REQUIRED :
Power Supply : 230V AC Supply.
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 30-LABORATORY OVEN

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To determination of presence of corrosive sulphur in petroleum products TECHNICAL DESCRIPTION : The apparatus consists of a bath either dual purpose (50°C & 100°C) or a boiling bath (100° C only) with stainless steel bomb and copper strips of definite size 6 bombs or 18 test tubes can be accommodate in each type of bath with different temperature regulation system (Thermostatic control (or) Digital Temperature controller cum indicator DIMENSIONS AND WEIGHT : Size :0.7 m.(L)x 0.7 m(W) X 0.7m ( H ) Weight :Approx. 20Kg SERVICE REQUIRED : Power Supply : 230V AC Supply. SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 32-COPPER STRIP CORROSION TEST APPARATUS

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Calculate the viscosity of tar
TECHNICAL DESCRIPTION : The setup consist of Consist 2 cups in a S.S. Water Bath mounted on Stand with leveling feet. Fitted with 1000 watts immersion heater. Temperature is controlled by DIGITAL ELECTONIC CONTROLLER with F.H.P. electric motor Stirrer. Supplied with one Tar Cups 10mm and one 4 mm orifice with Valves.
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.5m ( H )
Weight :Approx. 9Kg
SERVICE REQUIRED :
Power Supply : 230V AC Supply.
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 34-TAR VISCOMETER