CRE – 021 RTD IN CSTR

/in /by

Mixed flow reactor is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor The reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.
EXPERIMENTAL SETUP
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS, Double Wal, Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to `FHP Motor
Digital Temp Indicator : 0 – 200 0 C
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator, Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 020 RTD PLUG FLOW REACTOR

/in /by

EXPERIMENTAL SETUP :
Reactor :Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 019 RTD BATCH REACTOR

/in /by

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor
Piping : SS, PVC
Setup Mounting : On sturdy MS stand with powder coated
SERVICE REQUIRED : Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 40 Kg

CRE – 018 RTD IN PACKED BED REACTOR

/in /by

EXPERIMENTAL SETUP :
Reactor : Material Borosilicate glass,
Packing : Raschig Rings
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator : 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 017 COMBINED FLOW REACTOR

/in /by

The set up consist of plug flow reactor and stirred tank reactor arranged in series in which the reaction is carried out. The flow rate of reactant is measured by the Rota meter. The temperature is measured by sensor

RANGE OF EXPERIMENTS :

  1. Study of Combined flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Combined flow reactor.

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) , 1No. of CSTR , 1No. PFR
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator : 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping :SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
SPACE REQUIRED :1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator,
Distilled water
SERVICE REQUIRED : Air Supply: 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V.
WEIGHT : @ 50 Kg

CRE – 007 CONTINUOUS STIRRED TANK REACTOR

/in /by

C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor

RANGE OF EXPERIMENTS :

  1. Study of Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Continuous stirred tank reactor the sturdy MS stand with powder coated.

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated

CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein
indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 55 Kg

SWELLING INDEX APPARATUS

/in /by

The Free Swelling Index test is a rapid, small-scale, empirical method for measuring the free-swelling properties of coal. Results of the test may be used as an indication of the coal’s coking characteristics, and have also been used as an index of the extent to which a coal has been oxidized or weathered.
Features
Rapid, easy, small-scale, and empirical method for measuring the free-swelling properties of coal.
Supplied with
Heater.
Tripod and crucible holder assembly.
Temperature control unit.
Crucibles and cover.

SOFTENING POINT APPARATUS

/in /by

For determination of softening point of bituminious materials according to IP 1206-1958. Softening point is that temperature at which the speciman under test becomes soft enough to allow a steel ball of specific dimension to fall a required distance under test condition. The apparatus consists of glass beaker, ring Stand two steel balls with ring and ball guides, hand Stirrer.

DISTILLATION APPARATUS

/in /by

This apparatus used for determination of distillation characteristics of petroleum products.The instrument consist of metal shield to support distillation flask with geared height adjustable device.

JUNKER’S GAS CALORIMETER

/in /by

As per Bulletin enclosed.

Standard supply includes Calorimeter with Power Coated stainless steel exterior; Pressure Governor, Gas Flow Meter 30 to 270 lit/hr. Unbreakable Measuring Jar (2 lit & 50 ml.) ; 3 thermometers ; Flexible tubing for gas & water lines & instruction manual containing necessary diagrams etc.