HYDRAULIC SERVO SYSTEM

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
a. To study the response of system at various input pressure
b. To study the response for step input at no load condition
. c. To study the response for inertia load
d. To study the response for Viscous Damping
TECHNICAL DESCRIPTION :
The setup consist of power-pack, a four way spool valve used as a servo valve, the output cylinder, input and feedback linkages. A sliding spool type servo-valve supplies fluid to a piston whose motion is feed back through mechanical linkages to actuate the servo-valve and closed the loop. The translational output is converted into rotational output. The input and output displacements are transferred to recording pens through flexible linkages. A synchronous motor is used to feed paper strip at a constant speed on which input and output curve are obtained simultaneously. To simulate inertia load on the output side, a load disc is mounted of which weights are clamped and the inertia can be varied. A damper is attached to the output jack, to study the effect of damping on the output curve. Damping is varied and its effect on output is observed.

DIMENSIONS AND WEIGHT :
Size :1.2 m.(L)x 0.6 m(W) X 1.7m ( H )
Weight :Approx. 75 Kg
SERVICE REQUIRED :
440 v Ac Supply 50 Hz , Three Phase
Hydraulic Oil : 60 ltrs
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 04-HYDRAULIC SERVO SYSTEM

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *