Tubular flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind . Actually there may be lateral mixing of fluid in plug flow reactor . However , there must be no mixing or diffusion along the flow path. In a plug flow reactor composition of fluid varies from point to point along the flow path.
RANGE OF EXPERIMENTS :
- To study of Isothermal Plug flow reactor.
- To calculate the reaction rate constant k for given reaction in Isothermal Plug flow reactor
EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , \ Insulated with glass Wool
Heater : Nichrome wire heater
Digital Temp Indicator : 0 – 200 0 C ,Indicator cum Controller
Temp Sensor : CR /AL Type.
Stop watch : Electronic
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
SPACE REQUIRED :1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
CHEMICALS REQUIRED :NaOH, Ethyl Acetate , HCL ,
Phenolphthalein indicator, Distilled water
SERVICE REQUIRED : Air Supply: @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
WEIGHT : @ 50 Kg