HYBRID POWER GENERATOR

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To study the Hybrid power generator system TECHNICAL DESCRIPTION :
The hybrid energy system is a photovoltaic array coupled with a wind turbine.[1] This would create more output from the wind turbine during the winter, whereas during the summer, the solar panels would produce their peak output. Hybrid energy systems often yield greater economic and environmental returns than wind, solar, geothermal or trigeneration stand-alone systems by themselves. DIMENSIONS AND WEIGHT : Size :2 5 m.(L)x 2.5 m(W) X 5 m ( H )
Weight :Approx. 500 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 22-HYBRID POWER GENERATOR

BIOMASS GASIFIER

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study the Biomass gasifier
TECHNICAL DESCRIPTION :
Biomass gasification is a process of converting solid biomass fuel into a gaseous combustible gas (called producer gas) through a sequence of thermo-chemical reactions. It was designed primarily for woody biomass, but can handle many different feedstocks if they are pelletized and have wet-basis moisture content below 25%. The pelletized feedstock is loaded in to the hopper. The reaction bed in the hearth is externally lit and the oxygen in the incoming air combusts with some of the biomass in order to generate the heat that is then used by the pyrolysis and gasification reactions. The syngas is cleaned by several filtering mechanisms to be able to run directly into a natural gas engine and generator set to produce electricity.

DIMENSIONS AND WEIGHT :
Size :2 5 m.(L)x 2.5 m(W) X 5 m ( H )
Weight :Approx. 1500 Kg
SERVICE REQUIRED :
Power Supply : 230 V ac Single Phase
Cooling Pond : As per Drawing Provided
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 23-BIOMASS GASIFIER

NIGHT SOIL GAS PLANT

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study the Night Soil Gas Plant
TECHNICAL DESCRIPTION :
Biogas is produced as landfill gas (LFG), which is produced by the breakdown of Biodegradable waste inside a landfill due to chemical reactions and microbes, or as digested gas, produced inside an anaerobic digester. A biogas plant is the name often given to an anaerobic digester that treats farm wastes or energy crops. It can be produced using anaerobic digesters (air-tight tanks with different configurations). These plants can be fed with energy crops such as maize silage or biodegradable wastes including sewage sludge and food waste. During the process, the microorganisms transform biomass waste into biogas (mainly methane and carbon dioxide) and digestate. The biogas is a renewable energy that can be used for heating, electricity, and many other operations that use a reciprocating internal combustion engine, such as GE Jenbacher or Caterpillar gas engines.[4] Other internal combustion
engines such as gas turbines are suitable for the conversion of biogas into
both electricity and heat. The digestate is the remaining inorganic matter
that was not transformed into biogas. It can be used as an agricultural
fertiliser.
DIMENSIONS AND WEIGHT :
Size :2 5 m.(L)x 2.5 m(W) X 5 m ( Depth )
Weight :Approx. 1500 Kg
SERVICE REQUIRED :
Civil Work : As per Drawing Provided
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 24-NIGHT SOIL GAS PLANT

WATER MILL

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study the Water Mill
TECHNICAL DESCRIPTION :
A watermill or water mill is a mill that uses moving water as its power source. It is thus a structure that uses a water wheel or water turbine to drive a mechanical process such as milling (grinding), rolling, or hammering. Such processes are needed in the production of many material goods, including flour, lumber, paper, textiles, and many metal products. Thus watermills may be gristmills, sawmills, paper mills, textile mills, hammermills, trip hammering mills, rolling mills. The present setup consist of water mill with suitable capacity pump. The arrangement is provided to measure the flow rate of water.An alternator is provided to measure the output power from the water mill
DIMENSIONS AND WEIGHT :
Size :1 5 m.(L)x 1.5 m(W) X 1 m ( H )
Weight :Approx. 200 Kg
SERVICE REQUIRED :
Civil Work : As per Drawing Provided
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 25-WATER MILL

LIGHTNING DETECTOR

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To use the Lightning Detector
TECHNICAL DESCRIPTION :
In a rugged self-contained case, it has the electronic sophistication to detect lightning strikes over 40 miles away, and to accurately track a storm’s approach with both its audible horn and its large LED visual alerts. The LED alerts are in four ranges, providing vital information when the storm is moving towards, away or parallel to your position
DIMENSIONS AND WEIGHT :
Size :0.2 m.(L)x 0.2 m(W) X 0.1 m ( H )
Weight :Approx. 2 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 26-LIGHTNING DETECTOR

ANEROID BAROMETER

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To Measure the atmospheric pressure TECHNICAL DESCRIPTION :
A nonliquid barometer called the aneroid barometer is widely used in portable instruments and in aircraft altimeters because of its smaller size and convenience. It contains a flexible-walled evacuated capsule, the wall of which deflects with changes in atmospheric pressure. This deflection is coupled mechanically to an indicating needle DIMENSIONS AND WEIGHT : Size :0.2 m.(L)x 0.2 m(W) X 0.1 m ( H )
Weight :Approx. 0.5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 27-BAROMETER

MERCURY BAROMETER

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To Measure the atmospheric pressure TECHNICAL DESCRIPTION :
A mercury barometer has a glass tube closed at one end with an open mercury-filled reservoir at the base. The weight of the mercury creates a vacuum in the top of the tube known as Torricellian vacuum. Mercury in the tube adjusts until the weight of the mercury column balances the atmospheric force exerted on the reservoir. High atmospheric pressure places more force on the reservoir, forcing mercury higher in the column. Low pressure allows the mercury to drop to a lower level in the column by lowering the force placed on the reservoir. DIMENSIONS AND WEIGHT : Size :0.2 m.(L)x 0.1 m(W) X 0.3 m ( H )
Weight :Approx. 0.5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 28-MERCURY BAROMETER

ALTIMETER BAROMETER

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To Measure the atmospheric pressure TECHNICAL DESCRIPTION : This digital altimeter is designed small and delicate with multifunction including altimeter, barometer, compass, thermometer, weather forecast and time with blue LED screen display DIMENSIONS AND WEIGHT : Size :0.2 m.(L)x 0.2 m(W) X 0.1 m ( H )
Weight :Approx. 0.5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 29-ALTIMETER BAROMETER

WHEATHER STATION

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study and use the whether station
TECHNICAL DESCRIPTION :
This instruments are compact in sizes and predicts about the weather conditions such as humidity, speed and temperature levels of atmosphere. Our range of Weather Meter Pockets are useful for Hunters, Travellers,Mountaineers etc to know about the latest weather conditions. A Digital whether station Measure wind Speed, Temp, wind Chill, Relative Humidity,Dew Point, heat index, Barometric Pressure & altimeter, Built in alarm function, bar Chart
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.5 m ( H )
Weight :Approx. 5 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 30-WHEATHER STATION

PAN EVAPORIMETER

/in /by

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Measure the amount of liquid Evaporated over a set period of time TECHNICAL DESCRIPTION : This Pan Evaporimeter is manufactured as per Is:5973 :1970.The Pan is manufactured from painted GI sheet tested for water leak proofness. The stilling well and thermometer clamps are manufactured from Brass. This is supported on wooden platform and covered with reinforced chicken, Measuring Jar DIMENSIONS AND WEIGHT : Size :0.5 m.(L)x 0.5 m(W) X 0.7 m ( H )
Weight :Approx. 5 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 31-PAN EVAPORIMETER