SOLAR MOBILE CHARGER

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To Study the Solar Mobile Charger TECHNICAL DESCRIPTION :
Solar cell phone chargers use solar panels to charge cell phone batteries. They are an alternative to conventional electrical cell phone chargers DIMENSIONS AND WEIGHT : Size :0.1 m.(L)x 0.1 m(W) X 0.1 m ( H )
Weight :Approx. 2 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 11-MOBILE CHARGER

SOLAR TORCH

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Study the Solar Torch
TECHNICAL DESCRIPTION :
It consist of rechargeable battery with compactable solar charger, Provided with led lamps.
DIMENSIONS AND WEIGHT :
Size :0.1 m.(L)x 0.1 m(W) X 0.1 m ( H )
Weight :Approx. 2 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 12-SOLAR TORCH

SOLAR WATER HEATING SYSTEM

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Study the Solar Water Heating System
TECHNICAL DESCRIPTION :
In a “close-coupled” SWH system the storage tank is horizontally mounted immediately above the solar collectors on the roof. No pumping is required as the hot water naturally rises into the tank through thermosiphon flow. In a “pump-circulated” system the storage tank is ground- or floor-mounted and is below the level of the collectors; a circulating pump moves water or heat transfer fluid between the tank and the collectors . A rotameter is provided to measure the flow of water. Temperature indicator is used to measure the temperature at water inlet and water outlet. A plastic water supply tank is provided for supplying the water.
DIMENSIONS AND WEIGHT :
Size :1.5 m.(L)x 1.2 m(W) X 2.0 m ( H )
Weight :Approx. 60 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 13-SOLAR WATER HEATING SYSTEM

SOLAR PUMP TEST RIG

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Study the Solar Pump Test Rig
TECHNICAL DESCRIPTION :
Solar Photovoltaic array mounting structure suitable for mounting the SPV module is supplied. The pump is erected with HDPE pipe of suitable length cables and interconnecting wires as required for installation is supplied suitable box for housing the inverter. A measuring tank is provided for measurement of flow of water through the pump. This system can be used for AC/ DC Pumps.
DIMENSIONS AND WEIGHT :
Size :2.5 m.(L)x 1.2 m(W) X 1.0 m ( H )
Weight :Approx. 60 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 14-SOLAR PUMP TEST RIG

PYRANOMETER

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Measure solar radiation flux density.
TECHNICAL DESCRIPTION :
A pyranometer is a sensor based on thermopiles designed to measure the broadband of the solar radiation flux density from a 180° field of view angle. It Consist of a thermocouple junction connected in series as sensing element. The sensing element is coated with a highly stable carbon based non organic coating, which delivers excellent spectral absorption and long term stability characteristics
The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector is provided for Signal output . The Pyranometer does not require any power, it supplies a low voltage of 0-20mV in relation to the amount of incoming radiation
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.4 m ( H )
Weight :Approx. 7 Kg
SERVICE REQUIRED :
Power Supply : 230 V AC
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 16-THERMOCOUPLE PYRANOMETER

SILICON PHOTODIODE PYRANOMETER

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Measure solar radiation flux density.
TECHNICAL DESCRIPTION :
A photodiode-based pyranometer can detect the portion of the solar spectrum between 400 nm and 900 nm, with the most performant detecting between 350 nm and 1100 nm. The photodiode converts the aforementioned solar spectrum frequencies into current at high speed, thanks to the photoelectric effect. The conversion is influenced by the temperature with a raise in current produced by the raise in temperature (about 0,1% • °C)
A photodiode-based pyranometer is composed by a housing dome, a photodiode, and a diffuser or optical filters. The photodiode has a small surface area and acts as a sensor. The current generated by the photodiode is proportional to irradiance; an output circuit, such as a transimpedance amplifier, generates a voltage directly proportional to the photocurrent. The output is usually on the order of millivolts, the same order of magnitude of thermopile-type pyranometers.
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.4 m ( H )
Weight :Approx. 7 Kg
SERVICE REQUIRED :
Power Supply : 230 V AC
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 17-PHOTODIODE PYRANOMETER17-PHOTODIODE PYRANOMETER

PHOTOVOLTAIC PYRANOMETER

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Measure solar radiation flux density.
TECHNICAL DESCRIPTION :
Photovoltaic pyranometer is a derivation of the photodiode pyranometer . this pyranometer is also known as “reference PV cell”, “irradiance sensor”, “solarimeter”, “solar sensor” . The active part of the sensor is composed of a photovoltaic cell working in near short-circuit condition. As such, the generated current is directly proportionate to the solar radiation hitting the cell in a range between 350 nm and 1150 nm
A photovoltaic pyranometer is essentially assembled with the following parts:
A metallic container with a fixing staff
A small photovoltaic cell
Signal conditioning electronics
Silicon sensors such as the photodiode and the photovoltaic cell vary the output in function of temperature
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.4 m ( H )
Weight :Approx. 7 Kg
SERVICE REQUIRED :
Power Supply : 230 V AC
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 18-PHOTOVOLTAIC PYRANOMETER

PYRHELIOMETER

RANGE OF EXPERIMENTS TO BE CARRIED OUT: 1. To Measure direct beam Solar Irradiance TECHNICAL DESCRIPTION :
A pyrheliometer is an instrument for measurement of direct beam solar irradiance. Sunlight enters the instrument through a window and is directed onto a thermopile which converts heat to an electrical signal that can be recorded. The signal voltage is converted via a formula to measure watts per square metre. It is used with a solar tracking system to keep the instrument aimed at the sun. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.3 m ( H )
Weight :Approx. 2 Kg SERVICE REQUIRED : Power Supply : 230 V AC SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 19-PYRHELIOMETER

RAIN GAUGE

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To Measure the amount of liquid precipitation over a set period of time
TECHNICAL DESCRIPTION :
This Rain Gauge is manufactured as per IS:5235:1969 and manufactured from fiberglass rain forced plastic which is non corrosive Container is assembled with Gun-metal Ring and Locking arrangements.
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.7 m ( H )
Weight :Approx. 5 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 20-RAIN GAUGE

WIND TURBINE SYSTEM

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To study the wind turbine system
TECHNICAL DESCRIPTION :
A wind turbine is a device that converts the wind’s kinetic energy into electrical power. The term appears to have been adopted from hydroelectric technology (rotary propeller). The technical description of a wind turbine is aerofoil-powered generator. Horizontal-axis wind turbines (HAWT) have the main rotor shaft and electrical generator at the top of a tower, and must be pointed into the wind. Small turbines are pointed by a simple wind vane, while large turbines generally use a wind sensor coupled with a servo motor. The wind turns the blades, which spin a shaft, which connects to a generator and makes electricity.
DIMENSIONS AND WEIGHT :
Size :2 5 m.(L)x 2.5 m(W) X 5 m ( H )
Weight :Approx. 500 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 21-WIND TURBINE SYSTEM