Archive for category: FUEL LAB

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To determination the Calorific value of liquid and solid fuels
TECHNICAL DESCRIPTION :
The apparatus consists of following parts.
1. Bomb : The Bomb consists of three parts viz. Bomb body, Lid & Cap.The upper side of the lid is also provided with small hook rod lifting it and with a Schrader valve for filling oxygen in the Bomb. The Schrader, valve is provided with a metallic cap.
2. Water Jacket :It is made of Stainless Steel polished on the inside and also outside to minimize radiative losses. The top of jacket carries a rod to hold the stirrer unit, a threaded adopter to support the Beckman thermometer holder rod, and a small pipe through which water is added.
3. Offset Stirrer : It consists of a stirrer driven at constant speed by a motor through a heat insulator rubber belt.
4. Calorimeter Vessel : Is made of stainless steel and is polished outside.
5. Bomb Firing Unit :The firing unit is operated by A.C. Mains (230 Volts, 50 Hz). The electric box is provided with terminals for the stirrer unit, the ALARAM unit and for the Bomb Fuse wire.

6. Pressure Gauge On Stand :An accurate pressure gauge is supplied for
measurement of pressure of oxygen in the Bomb.
7. Gas Release Valve : It is to remove the excess of oxygen. It is screw on
the Schrader valve provided on the Lid of the Bomb.
8. Pellet Pressure :
The pellet pressure has 10 mm. Diameter punch and die Coal or other powered
samples are compressed into pellets
9. Crucible :The stainless steel crucible is offered as standard with instrument.
10. Ignition Wire : It is nichrome wire
DIMENSIONS AND WEIGHT :
Size :0.5 m.(L)x 0.5 m(W) X 0.6m ( H )
Weight :Approx. 30 Kg
SERVICE REQUIRED :
Power Supply : 230v AC Single Phase
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 22-BOMB CALORIMETER

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To determination the Melting point of solid
TECHNICAL DESCRIPTION : Consist with aluminium cylindrical block for heating, Radial holes admits a thermometer and glass capillary. Temp. Controlled by energy regulator. Regulator fitted to the unit and with high, low heat switch. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.4m ( H ) Weight :Approx. 3 Kg SERVICE REQUIRED : Power Supply : 230v AC Single Phase SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 24-MELTING POINT APPARATUS

RANGE OF EXPERIMENTS TO BE CARRIED OUT:
1. To determination the Drop point of Grease
TECHNICAL DESCRIPTION : It consists of dropping point cup made out of heavy quality brass, oil bath which is made borosilicate glass beaker, heater of suitable sized capacity & test tube. Hand stirrer for uniform temperature in bath .Temperature measured by using Thermometer. DIMENSIONS AND WEIGHT : Size :0.3 m.(L)x 0.3 m(W) X 0.4m ( H ) Weight :Approx. 5 Kg SERVICE REQUIRED : Power Supply : 230v AC Single Phase SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 26-DROP POINT OF GREASE APPARATUS

RANGE OF EXPERIMENTS TO BE CARRIED OUT: To Perform worked penetration” tests on lubricating greases TECHNICAL DESCRIPTION : Hand lever operated grease working machine designed for short duration “worked penetration” tests on lubricating greases. Consists of one steel ASTM grease worker with hand lever mechanism mounted on a sturdy steel base. Spring loaded tightening clamps hold grease worker securely on base, and steel pins in hand lever upright support facilitate disassembly of grease worker. DIMENSIONS AND WEIGHT : Size :0.2 m.(L)x 0.2 m(W) X 0.3m ( H ) Weight :Approx. 3 Kg SERVICE REQUIRED : SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 28-GREASE WORKER

TECHNICAL DESCRIPTION :
Hot Air Oven Electrically Operated and Thermostatically Controlled, Stainless Steel internal chamber and External Body made of Mild Steel Sheet (Powder Coated Paint) or Stainless Steel Sheet with glasswool insulation between the chambers. Temperature Thermostatically controlled by hydraulic thermostat from ambient to 250°C. Air ventilators are also provided on the sides of the unit. Internal chamber is provided with ribs for adjusting the shelves according to requirements. The On/Off Rocker Switch with Indicator and Thermostat Indicator is fitted on the display panel.
DIMENSIONS AND WEIGHT :
Size :0.7 m.(L)x 0.7 m(W) X 0.7m ( H )
Weight :Approx. 20Kg
SERVICE REQUIRED :
Power Supply : 230V AC Supply.
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get More Details:- 30-LABORATORY OVEN