CRE – 011 MIXED FLOW REACTOR

Mixed flow reactor is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor The reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.

RANGE OF EXPERIMENTST :

  1. Study of Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Continuous stirred tank reactor

EXPERIMENTAL SETUP
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS, Double Wal, Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to `FHP Motor
Digital Temp Indicator : 0 – 200 0 C
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate , HCL , Phenolphthalein indicator, Distilled
water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2 Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 010 CASCADE CONTINUOUS STIRRED TANK REACTOR

C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor The reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.

  1. Study of Cascade Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Cascade Continuous stirred tank reactor .

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) , 3 No.
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 3 No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C, Indicator cum Controller
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator ,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 70 Kg

CRE – 009 THREE CONTINUOUS STIRRED TANK REACTOR CONNECTED IN SERIES

C.S.T.R is a reactor in which the content are well stirred and Uniform throughout

RANGE OF EXPERIMENTS :

  1. Study of Continuous stirred tank reactor in series .
  2. To calculate the reaction rate constant k for given reaction in Continuous stirred tank reactor in series

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) , 3 No.
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS, Double Wall, Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 3 No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C , Indicator cum Controller
Temp Sensor : CR/AL Type
Stop watch : Electronic
Piping :SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator ,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lp
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 70 Kg

CRE – 008 ISOTHERMAL CONTINUOUS STIRRED TANK REACTOR

C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactorThe reactants are initially charged in to a container, mixed well and then left to react for certain period of time. At any instant the composition throughout the rector is uniform.

RANGE OF EXPERIMENTS :

  1. Study of Isothermal Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Isothermal Continuous stirred tank reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor
Digital Temp Indicator : 0 – 200 0 C , Indicator cum Controller
Temp Sensor : CR/AL Type
stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated.
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator , Distilled
water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2 Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED
: 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 55 Kg

CRE – 007 CONTINUOUS STIRRED TANK REACTOR

C.S.T.R is a reactor in which the content are well stirred and uniform throughout . Thus exit stream from this reactor has the same composition as the fluid within the reactor. We can refer also mixed type reactor

RANGE OF EXPERIMENTS :

  1. Study of Continuous stirred tank reactor.
  2. To calculate the reaction rate constant k for given reaction in Continuous stirred tank reactor the sturdy MS stand with powder coated.

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated

CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein
indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 55 Kg

CRE – 006 ISOTHERMAL PLUG FLOW REACTOR

Plug flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind

RANGE OF EXPERIMENTS

  1. To study of Isothermal Plug flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Isothermal Plug flow reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Water Bath : Material SS , Double Wall , Insulated with glass Wool
Heater : Nichrome wire heater
Digital Temp Indicator : 0 – 200 0 C ,Indicator cum Controller
Temp Sensor : CR /AL Type.
Stop watch : Electronic
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator ,
Distilled water
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 005 PLUG FLOW REACTOR

Plug flow reactor is characterized by the fact that the flow of fluid through the reactor is orderly no element of fluid overtaking or mixing with any other element ahead or behind . Actually there may be lateral mixing of fluid in plug flow reactor . However , there must be no mixing or diffusion along the flow path. In a plug flow reactor composition of fluid varies from point to point along the flow path.

RANGE OF EXPERIMENTS

  1. To study of Plug flow reactor.
  2. To calculate the reaction rate constant k for given reaction in Plug flow reactor

EXPERIMENTAL SETUP :
Reactor :Material Stainless steel (SS) ,
Flow Measurement : 2 No. Pre calibrated Rota meter
Feed Tank : 2 No. of stainless steel feed tank
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type0 – 2 kgf / cm2
Piping : SS , PVC
Product receiver : 1 No. SS tank
Setup Mounting : On sturdy MS stand with powder
coated
SERVICE REQUIRED : Air Supply : @ 6 CFM at 4 Kg /cm2 Power Supply : 230 V,
50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 004 B) ISOTHERMALSEMI BATCH REACTOR

Semi Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.

RANGE OF EXPERIMENTS

  1. Study of Semi Batch Reactor.
  2. To calculate the reaction rate constant k for given reaction in Semi batch reactor

EXPERIMENTAL SETUP :

Reactor : Material Stainless steel (SS) ,
Feed Circulation :By Compressed Air
Pressure Regulator :0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Feed Tank : 1 No. of stainless steel feed tank
Flow Measurement : 1 No. Pre calibrated Rota meter
Stirrer : 1 No.SS impeller and shaft coupled to FHP
Motor
Digital Temp Indicator : 0F H–P 2 0M0o 0t oCr, Indicator cum
Controller.
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with Powder coated
CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL ,
Phenolphthalein indicator , Distilled water
SERVICE REQUIRED : Air Supply : @ 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 004 A) SEMI BATCH REACTOR

Semi Batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.

RANGE OF EXPERIMENTS:

  1. Study of Semi Batch Reactor.
  2. To calculate the reaction rate constant k for given reaction in Semi batch reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Feed Circulation : By Compressed Air
Pressure Regulator : 0-2 kgf / cm2
Pressure Gauge : Bourdon type 0 – 2 kgf / cm2
Feed Tank : 1 No. of stainless steel feed tank
Flow Measurement : 1 No. Pre calibrated Rota meter
Stirrer : 1 No.SS impeller and shaft coupled to FHP Motor
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with Powder coated

CHEMICALS REQUIRED : NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator ,
Distilled water
SERVICE REQUIRED : Air Supply : @ 4 Kg /cm2
Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.

SPACE REQUIRED : 1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 50 Kg

CRE – 003 ADIABATIC BATCH REACTOR

Adiabatic batch reactor is simple, needs little supporting equipment and therefore ideal for small scale experimental studies on reaction kinetics. Industrially it is used when relatively small amounts of material are to be treated.

RANGE OF EXPERIMENTS

  1. Study of Adiabatic Batch Reactor.
  2. To calculate the reaction rate constant k for given reaction in Adiabatic batch reactor

EXPERIMENTAL SETUP :
Reactor : Material Stainless steel (SS) ,
Water Bath : Material SS , Double Wall, Insulated with glass wool
Heater : Nichrome wire heater
Stirrer : 1 No.SS impeller and shaft coupled to
Digital Temp Indicator : 0F H–P 2 0M0o 0t oCr, Indicator cum Controller.
Temp Sensor : CR /AL Type.
Stop watch : Electronic
Piping : SS , PVC
Setup Mounting : On sturdy MS stand with powder coated
CHEMICALS REQUIRED: NaOH, Ethyl Acetate ,HCL , Phenolphthalein indicator ,
Distilled water
SERVICE REQUIRED : Water Supply : @ 2 lpm
Power Supply : 230 V, 50 Hz, A.C.
SPACE REQUIRED :1.5 m. ( L) x 1.0 m (W) X 1.5 m (H).
WEIGHT : @ 45 Kg