SAYBOLT VISCOMETER

/in /by

TECHNICAL DESCRIPTION :
The apparatus consist of bath with cup of 10 mm or 4 mm orifice and sleeve stirrer with ball lifting clip and ball .The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.4m ( H )
Weight :Approx. 4 Kg
SERVICE REQUIRED :
230 v Ac Supply 50 Hz
Lubricating Oil : 1 ltr
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 11-SAYBOLT VISCOMETER

STANDARD TAR VISCOMETER

/in /by

TECHNICAL DESCRIPTION :
Electrical Heating with Immersion Heating Elements and Dimmer stat for controlling the temperature. Suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply complete with 10mm cup and valve. Cup, 10mm Ball Valve, 10mm
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.4m ( H )
Weight :Approx. 4 Kg
SERVICE REQUIRED :
Power Supply : 230 v Ac Supply 50 Hz
Lubricating Oil : 1 ltr
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 12-STANDARD TAR VISCOMETER

MARSHALL MANUAL COMPACTION APPARATUS

/in /by

TECHNICAL DESCRIPTION: Supplied complete with compaction hammer 6” diameter, wooden pedestal capped with steel plate and mould clamp device, support/ hammer guide
DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 1.6m ( H )
Weight :Approx. 60 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 13-MARSHALL COMPACTION APPARATUS

COMPACTION PEDESTAL

/in /by

TECHNICAL DESCRIPTION :
Comprising a 300mm sq x 25mm thick steel plate complete with 4 tie rods and securing nuts. A mould clamp and hammer guide are fitted to the plate. The unit is supplied complete with a laminated hardwood block. DIMENSIONS AND WEIGHT :
Size :0.4 m.(L)x 0.4 m(W) X 0.6m ( H )
Weight :Approx. 20 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 14-COMPACTION PEDESTAL

MARSHALL STABILITY TEST APPARATUS

/in /by

TECHNICAL DESCRIPTION :
Robust Construction 50KN capacity Rate of travel 50.8mm/min Safety cut-off switch It consists of body housing, a geared screw jack and motor drive mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply.
MARSHAL LOAD FRAME 1No.
Breaking Head Stability Mould, with a dial gauge (having 25mm travel and 0.01mm least count), for flow measurement 1 No. Compaction Mould, Steel cylindrical 3 Nos. Base Plate 3 Nos. Extension Collar 3 Nos.
Compaction Pedestal, Manual Operation, Comprising a steel plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate. 1Nos.d
Compaction Hammer, for use with compaction Pedestal and Mould, weight 4.5 kg with a free of 457mm. 2 Nos. Load Transfer Bar 1 No.
DIMENSIONS AND WEIGHT :
Size :0.6 m.(L)x 0.6 m(W) X 1.2m ( H )
Weight :Approx. 80 Kg
SERVICE REQUIRED :
Power Supply : 230 v Ac Supply 50 Hz
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 15-MARSHALL STABILITY TEST APPARATUS

PAVEMENT CORE DRILLING MACHINE

/in /by

TECHNICAL DESCRIPTION :
The Pavement Core Drilling Machine. Diesel engine powered road building drill has been designed specifically for the purpose of drilling test cores from or holes in, Roads, Airport Runways, Bridges etc. The Machine comprises of two vertical support columns, which carry the Drill head/Engine assembly with the help of screwed spindle. The 5 HP diesel engine with pulley mechanism works with minimum vibrations. The double precision bit advances with screwed spindle, which provides a constant, accurate drill pressure, minimum core chipping & long bit life. The complete assembly is supplied on a rigid metal base with leveling facility and is suitable for vertically down coring applications only.

DIMENSIONS AND WEIGHT :
Size :1.2 m.(L)x 1.0 m(W) X 1.2m ( H )
Weight :Approx. 80 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 16-PAVEMENT CORE DRILLING MACHINE

BITUMAN AUTOMATIC COMPACTOR

/in /by

TECHNICAL DESCRIPTION: The Automatic Compactor eliminates the laborious process of manual compaction and an even degree of compaction is achieved. The driven mechanism lifts the weight of 4.5kg and drops it through a correct height of 457 mm. The rammer foot is removable, which facilitates preheating. A compaction pedestal with specimen holder is fixed to the base. An Automatic Blow counter enables the number of blows to be present before each test and automatically stops the machine on completion. Suitable for operation on 230 V, 50 Hz, Single Phase, A.C. supply DIMENSIONS AND WEIGHT :
Size :0.6 m.(L)x 0.6 m(W) X 1.5m ( H )
Weight :Approx. 80 Kg
SERVICE REQUIRED : Power Supply : 230 v Ac Supply 50 Hz
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 17-BITUMAN AUTOMATIC COMPACTOR

BENKELMAN BEAM

/in /by

TECHNICAL DESCRIPTION :
Lightweight Aluminium construction Ease of Transportation Unique Telescopic Design Simplifying Field set up Compact, Thereby reducing the amount of storage spa needed Benkelman Beam utilizes the technique of using balanced beam in conjunction with a suitable vehicle to measure road flexure The improved Benkelman Beam is a convenient, accurate device for measuring the deflection of flexible pavements under moving wheel loads. Operating on a simple lever arm principle, the unit consists. Supplied with carrying case
DIMENSIONS AND WEIGHT :
Size :3.0 m.(L)x 0.2 m(W) X 1.5m ( H )
Weight :Approx. 10 Kg
SERVICE REQUIRED :
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 18-BENKELMEN BEAM

THIN FILM OVEN

/in /by

TECHNICAL DESCRIPTION : This dual purpose oven is designed to determine the loss in weight of bitumen and flux oils (Loss on Heating test) and the effect of heat and air on asphaltic materials (Thin Film test). The unit is heavily insulated and has a double glass door for viewing the test chamber thermometer and samples. Temperature is controlled at 163° C ± 1° C by means of a variable temperature controller and thermostat. Two rotating platforms are supplied with each oven: One accepts 9 standard penetration cups for the loss on heating test, the other accepts two 140mm diameter test pans for the thin film test DIMENSIONS AND WEIGHT :
Size :0.8 m.(L)x 0.8 m(W) X 0.5m ( H )
Weight :Approx. 40 Kg
SERVICE REQUIRED :
Power Supply : 230 v Ac Supply 50 Hz
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 19-THIN FILM OVEN

ROLLING THIN FILM OVEN

/in /by

TECHNICAL DESCRIPTION : The Rolling Thin Film Oven Test is used to obtain homogeneously aged material by the application of heat and air in order to simulate these affects in conventional mixing. The oven is of double wall construction with side vents and of the heated convection type of air Circulation. An electronic controller maintains the temperature at 163+ 0.5° C. A vertical, carriage is supplied to support 8 glass sample containers, which are rotated at 15+ 0.2rpm. An outlet orifice 1mm in diameter is connected to a 7.6m length of copper tubing and flow meter which controls the airflow at 4000 ml/min. Air is blown into the sample containers at their lowest point of travel by an internal air jet. The oven is supplied with 8 glass sample containers and a thermometer DIMENSIONS AND WEIGHT :
Size :0.8 m.(L)x 0.8 m(W) X 0.5m ( H )
Weight :Approx. 40 Kg
SERVICE REQUIRED :
Power Supply : 230 v Ac Supply 50 Hz
Air Supply : @ 2 kg / cm2
SCOPE OF DELIVERY:
1. Experimental Setup
2. Instructional Manual

Get PDF:- 20-ROLLING THIN FILM OVEN